Bilge Pump RULE LoPro Auto 12V - 900 GPH or 3407 LPH

Auto LoPro 12V Rule bilge pump.
Model LP900S
This product is currently unavailable
Variable outlet 3/4 or 19mm 1" or 25mm 1.1/8 or 28mm
Dimensions: 237mm long, 59mm diameter.
Current Draw: 4(amps)
Fuse Size: 7.5 amp
Max. recommended discharge head 3m
Brings Rule pumping power to tight spaces.
Fully rotating discharge body for installation flexibility.
Choice of discharge ports supplied with each pump.
Ignition protected.
Horizontal or Vertical Mounting
3 Operation Modes:
High water mode; The pump starts when the water level reaches 50mm (2")
Low water mode; Turn the motor cartridge 180º and the sensor is at 33mm (1.3")
Full Electronic mode; The pump automatically turns on every 2.5 minutes to check for water, if water is detected the pump runs until the water is gone.
Rule LoPro Submersible Bilge Pumps Video
Packaged Dimensions: L:30.00 x H:10.00 x W:21.00cm
Actual Weight: 0.70 Kg (Approx. 0.95 Kg packed)
Have you thought of connecting your bilge pump to a solar panel? So your bilge will empty of water whilst your not there without draining the battery.
20W Semi flexible kit - £109.95
10W Semi flexible kit - £75.00
Controller - £45.50

Also in Rule Bilge Pumps , Hand Pumps & Accessories

Our site uses cookies. For more information, see our cookie policy. Accept cookies and close
Reject cookies Manage settings